Ceratec Stonella Bone Matte Porcelain Plank Tile 3" x 24"

A long, narrow tile pulls the eye along a room and makes a hallway or a kitchen read longer. Stonella Bone gives you that in 3" x 24".

In simple terms: Stonella Bone is a 3x24 porcelain plank tile for floors and walls, indoors and out.

It is the matte finish in Bone from the Ceratec Stonella range.

The actual size is 2.9" x 23.6" (75 x 600 mm). It is 8.3 mm thick. The spec sheet lists PEI IV surface abrasion rating, a wet DCOF slip reading of 0.75, an R10 slip rating and water absorption of 0.1%. It is rated for commercial traffic. It is frost resistant. Shade variation is V3, moderate. It is made in Spain. Porcelain is fired dense, so it handles water, spills and daily foot traffic and the tile itself never needs sealing.

It suits open-plan floors, living areas, basements, shower and bathroom walls, covered porches and patios and commercial floors such as stores and offices. Pick it over a smaller tile when you want fewer grout lines; pick smaller if the floor is out of level.

Each box holds 20 pieces and covers 9.51 sq ft, so a 150 sq ft kitchen floor takes 16 boxes, or 18 boxes with about 10% extra for cuts and spares. For every 100 sq ft, plan on 12 boxes with the 10% extra included.

It is listed for outdoor use, but an outdoor floor also needs the right base and slope, so ask us before planning it outside.

In this size, Stonella also comes in Atlantic, Silver Breeze, Earth, Leaf and Straw. For edges, Ceratec recommends a 3/8" trim profile.

Our own crews install it, so the people who measure the job are the people who answer for it. See Ceratec Stonella Bone in person at our Mississauga showroom (700 Dundas St E, Unit 3-4, 905-277-2227) or our Barrie showroom (112 Saunders Rd, Units 1-4, 705-726-2272).