Ceratec Starkhex Décor Grey Matte Porcelain Tile 10" x 11"

A patterned floor is the one thing people remember about a room. Starkhex Décor Grey gives you the pattern in porcelain, without the sealing that cement tile needs.

In simple terms: Starkhex Décor Grey is a 10x11 porcelain tile for floors and walls, indoors and out.

It is the matte finish in Décor Grey from the Ceratec Starkhex range.

The actual size is 10.2" x 11.4" (258 x 290 mm). It is 11 mm thick. The spec sheet lists PEI IV surface abrasion rating, a wet DCOF slip reading above 0.42 and water absorption below 0.5%. It is rated for commercial traffic. It is frost resistant. Shade variation is V4, dramatic. It is made in Spain. Porcelain is fired dense, so it handles water, spills and daily foot traffic and the tile itself never needs sealing.

It suits kitchen floors, bathroom floors, hallways, basements, shower and bathroom walls, covered porches and patios and commercial floors such as stores and offices. Pick it when you want the floor to be the feature; in a large room, run a plain tile around a patterned area.

Each box holds 18 pieces and covers 10.55 sq ft, so a 40 sq ft bathroom floor takes 4 boxes, or 5 boxes with about 10% extra for cuts and spares. For every 100 sq ft, plan on 11 boxes with the 10% extra included.

It is listed for outdoor use, but an outdoor floor also needs the right base and slope, so ask us before planning it outside. At V4 the shade moves a lot from piece to piece, so we blend from several boxes as we lay it.

In this size, Starkhex also comes in Grey. For edges, Ceratec recommends a 1/2" trim profile.

Our own crews install it, so the people who measure the job are the people who answer for it. See Ceratec Starkhex Décor Grey in person at our Mississauga showroom (700 Dundas St E, Unit 3-4, 905-277-2227) or our Barrie showroom (112 Saunders Rd, Units 1-4, 705-726-2272).