G-Tile Monstone Bone Matte Porcelain Tile 12" x 24"

G-Tile Monstone Bone is a matte glazed porcelain tile in 12" x 24" (300 x 600 mm), non-rectified, part of the G-Tile Monstone range. The colour is Bone. The print runs 18 faces before it repeats, and the shade variation is rated V3.

It is 7.2 mm thick and made in Türkiye. It is rated PEI 4, which the PEI scale puts at light to heavy commercial wear. Mohs hardness is 5. It is rated R9 for slip, the residential standard on the spec sheet. Glazed porcelain has water absorption at or below 0.5%, so the tile itself does not need sealing.

Each box holds 9 pieces and covers 17.44 sq ft, so a 150 sq ft kitchen floor takes 9 boxes, or 10 boxes with about 10% extra for cuts and spares.

The spec sheet gives no frost rating, so we keep it indoors: no porches, patios or exterior steps. At R9 it is not the tile for a shower floor or a wet commercial area; the spec sheet points those to R10 or higher. It is pressed, not rectified, so plan on a slightly wider grout joint than a rectified tile.

Our own crews install it. See G-Tile Monstone Bone at our Mississauga showroom (700 Dundas St E, Unit 3-4, 905-277-2227) or our Barrie showroom (112 Saunders Rd, Units 1-4, 705-726-2272).