Ceratec Twist White Matte Ceramic Hexagon Tile 6" x 7"

A plain, solid-colour tile is the safe base for a room, since it works with any cabinet, vanity or wall colour. Twist White Hexagon is that kind of tile.

In simple terms: Twist White Hexagon is a 6x7 ceramic tile for floors and walls, indoors and out.

It is the matte finish in White from the Ceratec Twist range. The pattern or piece type is hexagon.

The actual size is 5.6" x 6.5" (142 x 164 mm). It is 8.5 mm thick. The spec sheet lists PEI IV surface abrasion rating, a wet DCOF slip reading above 0.42, an R10 slip rating and water absorption between 0.5% and 3%. It is rated for commercial traffic. It is frost resistant. Shade variation is V1, uniform. It is designed by Ceratec in Canada and made in Turkey. Ceramic has a lighter body than porcelain and is easy to cut. This one is listed for floors as well as walls.

It suits kitchen floors, bathroom floors, hallways, basements, shower and bathroom walls, covered porches and patios and commercial floors such as stores and offices. Pick it when you want the floor or wall to sit quietly behind the cabinets and fixtures.

Each box holds 45 pieces and covers 8.04 sq ft, so a 40 sq ft bathroom floor takes 5 boxes, or 6 boxes with about 10% extra for cuts and spares. For every 100 sq ft, plan on 14 boxes with the 10% extra included.

It is listed for outdoor use, but an outdoor floor also needs the right base and slope, so ask us before planning it outside.

In this size, Twist also comes in Grey. For edges, Ceratec recommends a 3/8" trim profile.

Our own crews install it, so the people who measure the job are the people who answer for it. See Ceratec Twist White Hexagon in person at our Mississauga showroom (700 Dundas St E, Unit 3-4, 905-277-2227) or our Barrie showroom (112 Saunders Rd, Units 1-4, 705-726-2272).