Ceratec Paros Light Grey Matte Porcelain Tile 12" x 24"

Natural stone needs sealing and every batch looks different. Paros Light Grey gives you a stone look in porcelain that stays consistent.

In simple terms: Paros Light Grey is a 12x24 stone look porcelain tile for floors and walls, indoors and out.

It is the matte finish in Light Grey from the Ceratec Paros range.

The actual size is 11.8" x 23.6" (300 x 600 mm). It is 8.5 mm thick. The spec sheet lists PEI III surface abrasion rating, a wet DCOF slip reading above 0.42 and water absorption below 0.5%. It is rated for light commercial traffic. It is frost resistant. Shade variation is V3, moderate. It is designed by Ceratec in Canada and made in Turkey. Porcelain is fired dense, so it handles water, spills and daily foot traffic and the tile itself never needs sealing.

It suits open-plan floors, living areas, basements, shower and bathroom walls and covered porches and patios. Pick it over real stone when you want the look with no sealing.

Each box holds 9 pieces and covers 17.4 sq ft, so a 150 sq ft kitchen floor takes 9 boxes, or 10 boxes with about 10% extra for cuts and spares. For every 100 sq ft, plan on 7 boxes with the 10% extra included.

It is listed for outdoor use, but an outdoor floor also needs the right base and slope, so ask us before planning it outside. It is rated for light commercial traffic, so keep it out of busy commercial floors.

In this size, Paros also comes in Dark Grey and White. For edges, Ceratec recommends a 3/8" trim profile.

Our own crews install it, so the people who measure the job are the people who answer for it. See Ceratec Paros Light Grey in person at our Mississauga showroom (700 Dundas St E, Unit 3-4, 905-277-2227) or our Barrie showroom (112 Saunders Rd, Units 1-4, 705-726-2272).