Centura Uniquestone Titanium Natural Porcelain 24" x 24"

Uniquestone Titanium belongs to Centura's Uniquestone range and measures 24" x 24". It carries the broken, tonal surface of natural stone, finished with a natural finish, left close to how the tile leaves the press. Shade variation is rated V3, a moderate spread of tone that gives the installation obvious movement piece to piece. At 24" x 24", it covers ground with fewer grout lines than a small format, which keeps a room reading as one surface. The slip rating is R10, which covers floors that see occasional water such as kitchens, bathrooms and entry halls. The body is frost resistant, which opens up porches, garages, balconies and other areas that drop below freezing. The rating covers both floors and walls, which lets a bathroom or kitchen run the same surface vertically and horizontally. The edges are rectified, cut square after firing, so it sets with a joint of roughly 2 to 3 mm over a flat substrate. The body measures 9.5 mm. The suggested grout is 939 - Mist. One box contains 3 pieces, enough for 11.45 sq ft, or 3.8153 sq ft a piece.