Centura Touch Stone Gold Levigato Matte Porcelain 24" x 48"

Centura Touch Stone Gold Levigato Matte Porcelain 24" x 48"

SKU: TO622LR
C$15.15per sqft

Lower prices may be available in store

1-877-593-0593
Fast local pickup & delivery available
Quick turnaround from our supplier network
C$15.15per sqft

Lower prices may be available in store

1-877-593-0593
Fast local pickup & delivery available
Quick turnaround from our supplier network

Enter the Sq.Ft Required below

sqft
Delivery or Pickup

Choose how you'd like to proceed

For This Product Only

For Multiple Products

Product Information

BrandCentura
CollectionTouch Stone
ColorGold
SKUTO622LR
MaterialPorcelain
FinishLevigato Matte
ShapeRectangle
Design LookMarble, Stone
Nominal Size24" x 48"
Width24 in / 60 cm
Length48 in / 120 cm
Thickness9 mm
Suitable ForFloor & Wall
Shade VariationV3
EdgeRectified
Frost ResistantYes
SurfaceGlazed
Recommended Grout940 - Antique White
Sold ByPiece
Pieces Per Box2
Coverage Per Piece7.764 sq ft
SQFT Per Box15.53
1 / 2
Centura Touch Stone Gold Levigato Matte Porcelain 24" x 48", Centura Tile
Click to zoom in

About this product

Centura lists Touch Stone Gold in the Touch Stone range: a 24" x 48" porcelain tile. It carries the veining and depth of quarried marble and the broken, tonal surface of natural stone, finished with a smoothed matte face. Shade variation is rated V3, a moderate spread of tone that gives the installation obvious movement piece to piece. At 24" x 48", it covers ground with fewer grout lines than a small format, which keeps a room reading as one surface. Because it is frost resistant, it can carry an interior floor out onto a covered patio or three-season room. It is approved for floor and wall installation, so wall and floor areas of the same room can be tiled from one order. The edges are rectified, cut square after firing, so it sets with a joint of roughly 2 to 3 mm over a flat substrate. The body measures 9 mm. The suggested grout is 940 Antique White. Boxes hold 2 pieces and cover 15.53 sq ft, or 7.764 sq ft a piece.

About this product

Centura lists Touch Stone Gold in the Touch Stone range: a 24" x 48" porcelain tile. It carries the veining and depth of quarried marble and the broken, tonal surface of natural stone, finished with a smoothed matte face. Shade variation is rated V3, a moderate spread of tone that gives the installation obvious movement piece to piece. At 24" x 48", it covers ground with fewer grout lines than a small format, which keeps a room reading as one surface. Because it is frost resistant, it can carry an interior floor out onto a covered patio or three-season room. It is approved for floor and wall installation, so wall and floor areas of the same room can be tiled from one order. The edges are rectified, cut square after firing, so it sets with a joint of roughly 2 to 3 mm over a flat substrate. The body measures 9 mm. The suggested grout is 940 Antique White. Boxes hold 2 pieces and cover 15.53 sq ft, or 7.764 sq ft a piece.

Product Information

BrandCentura
CollectionTouch Stone
ColorGold
SKUTO622LR
MaterialPorcelain
FinishLevigato Matte
ShapeRectangle
Design LookMarble, Stone
Nominal Size24" x 48"
Width24 in / 60 cm
Length48 in / 120 cm
Thickness9 mm
Suitable ForFloor & Wall
Shade VariationV3
EdgeRectified
Frost ResistantYes
SurfaceGlazed
Recommended Grout940 - Antique White
Sold ByPiece
Pieces Per Box2
Coverage Per Piece7.764 sq ft
SQFT Per Box15.53