Anatolia Plata Carrara Abisso Polished Bullnose Porcelain 3" x 12"

Anatolia Plata Carrara Abisso Polished Bullnose Porcelain 3" x 12"

SKU: 4502-0308-0
Fast local pickup & delivery available
Quick turnaround from our supplier network
Fast local pickup & delivery available
Quick turnaround from our supplier network

Enter the Sq.Ft Required below

sqft
Delivery or Pickup

Choose how you'd like to proceed

For This Product Only

For Multiple Products

Product Information

Product NameCarrara Abisso
SKU4502-0308-0
BrandAnatolia Tile
CollectionPlata
Product LineTrims
MaterialPorcelain
Tile TypeTrim
FinishPolished
Size3 x 12 in / 7.1 x 30 cm
SQFT Per Piece0.25
Shade VariationV2
Abrasion ResistanceCLASS 4
Mohs Hardness7
Dcof0.50
Water Absorption< 0.5%
Frost ResistancePass
RectifiedYes
Body TypeGlazed Porcelain
Pieces Per Box20
lbs Per Box18.34
Boxes Per Skid112
lbs Per Skid2054
Country Of OriginIN
Anatolia Plata Carrara Abisso Polished Bullnose Porcelain 3" x 12", Anatolia Tile & Stone
Click to zoom in

About this product

Plata Carrara Abisso is a 3" x 12" polished bullnose from Anatolia Tile. Visually it offers a polished face with a full reflective shine. Anatolia grades variation at V2, a slight shift in tone between pieces that stops the installation looking printed. is a bullnose it finishes an exposed tile edge, capping a wainscot, a niche or the top of a shower surround without leaving a raw cut on show. Anatolia tests it at a DCOF of 0.50, at or above the 0.42 threshold ANSI sets for level interior floors expected to be walked on wet, Class 4 abrasion resistance and Mohs hardness 7. The edges are rectified, cut square after firing, so it sets with a joint of roughly 2 to 3 mm on a flat substrate. The body is glazed porcelain. Made in India.

About this product

Plata Carrara Abisso is a 3" x 12" polished bullnose from Anatolia Tile. Visually it offers a polished face with a full reflective shine. Anatolia grades variation at V2, a slight shift in tone between pieces that stops the installation looking printed. is a bullnose it finishes an exposed tile edge, capping a wainscot, a niche or the top of a shower surround without leaving a raw cut on show. Anatolia tests it at a DCOF of 0.50, at or above the 0.42 threshold ANSI sets for level interior floors expected to be walked on wet, Class 4 abrasion resistance and Mohs hardness 7. The edges are rectified, cut square after firing, so it sets with a joint of roughly 2 to 3 mm on a flat substrate. The body is glazed porcelain. Made in India.

Product Information

Product NameCarrara Abisso
SKU4502-0308-0
BrandAnatolia Tile
CollectionPlata
Product LineTrims
MaterialPorcelain
Tile TypeTrim
FinishPolished
Size3 x 12 in / 7.1 x 30 cm
SQFT Per Piece0.25
Shade VariationV2
Abrasion ResistanceCLASS 4
Mohs Hardness7
Dcof0.50
Water Absorption< 0.5%
Frost ResistancePass
RectifiedYes
Body TypeGlazed Porcelain
Pieces Per Box20
lbs Per Box18.34
Boxes Per Skid112
lbs Per Skid2054
Country Of OriginIN