Mapei Ultrabond ECO 560 Premium Universal Rubber Flooring And VCT Adhesive 15 L

This is Ultrabond ECO 560 Premium Universal Rubber Flooring And VCT Adhesive, a universal adhesive for rubber flooring. It is for rubber sheet and tile, solid vinyl sheet, tile and plank, felt-backed vinyl sheet, VCT and vinyl-backed carpet. Flash coving is approved for solid vinyl, felt-backed vinyl and rubber sheet. A 15 L pail is roughly 495 to 733 sq ft with a square 1/16" notch. Sheet goods flash 0 to 15 minutes with an hour of working time. Tile and plank flash 30 to 60 minutes or until dry, with 2 hours. Over a non-porous substrate sheet goods must go into wet adhesive. Rated to 5 lb MVER and 80% slab RH. Light traffic at 24 hours and heavy at 72. Approved substrates are concrete, exterior-grade plywood, cement terrazzo, levelling compounds, one bonded layer of VCT, primed gypsum underlayment and radiant heat. Not over asbestos and not over any adhesive residue including cutback. A non-porous sheet floor must not go over a non-porous surface. Interior only. The readable data sheet for this one is a 2010 edition. A current version exists, so check it before relying on these figures. In stock in Mississauga and Barrie.