Anatolia Station Pearl Matte Bullnose Porcelain 3" x 24"

Anatolia Station Pearl Matte Bullnose Porcelain 3" x 24"

SKU: 4502-0276-0
Fast local pickup & delivery available
Quick turnaround from our supplier network
Fast local pickup & delivery available
Quick turnaround from our supplier network

Enter the Sq.Ft Required below

sqft
Delivery or Pickup

Choose how you'd like to proceed

For This Product Only

For Multiple Products

Product Information

NameStation Pearl
BrandAnatolia Tile
CollectionStation
CategoryPorcelain
SKU4502-0276-0
Size3 cm x 24 in / 7.1 x 60 cm
FinishMatte
Product NamePearl
MaterialPorcelain
Tile TypeTrim
SQFT Per Piece0.5
Shade VariationV3
Abrasion ResistanceCLASS 4
Mohs Hardness6
Dcof0.50
Water Absorption<0.5%
Frost ResistancePass
RectifiedYes
Body TypeColor Body Porcelain
Pieces Per Box15
lbs Per Box26.64
Boxes Per Skid56
lbs Per Skid1492
Country Of OriginTR
Anatolia Station Pearl Matte Bullnose Porcelain 3" x 24", Anatolia Tile & Stone
Click to zoom in

About this product

Station Pearl is a 3" x 24" matte bullnose from Anatolia Tile. The surface carries a matte face that absorbs light rather than bouncing it. Expect variation of V3, a moderate spread of tone that gives the floor real movement piece to piece. As a bullnose, it finishes an exposed tile edge, capping a wainscot, a niche or the top of a shower surround without leaving a raw cut on show. The published figures are a DCOF of 0.50, at or above the 0.42 threshold ANSI sets for level interior floors expected to be walked on wet, Class 4 abrasion resistance and Mohs hardness 6. The edges are rectified, cut square after firing, so it sets with a joint of roughly 2 to 3 mm on a flat substrate. It is a colour body porcelain, so the colour runs all the way through the tile. Made in Turkey.

About this product

Station Pearl is a 3" x 24" matte bullnose from Anatolia Tile. The surface carries a matte face that absorbs light rather than bouncing it. Expect variation of V3, a moderate spread of tone that gives the floor real movement piece to piece. As a bullnose, it finishes an exposed tile edge, capping a wainscot, a niche or the top of a shower surround without leaving a raw cut on show. The published figures are a DCOF of 0.50, at or above the 0.42 threshold ANSI sets for level interior floors expected to be walked on wet, Class 4 abrasion resistance and Mohs hardness 6. The edges are rectified, cut square after firing, so it sets with a joint of roughly 2 to 3 mm on a flat substrate. It is a colour body porcelain, so the colour runs all the way through the tile. Made in Turkey.

Product Information

NameStation Pearl
BrandAnatolia Tile
CollectionStation
CategoryPorcelain
SKU4502-0276-0
Size3 cm x 24 in / 7.1 x 60 cm
FinishMatte
Product NamePearl
MaterialPorcelain
Tile TypeTrim
SQFT Per Piece0.5
Shade VariationV3
Abrasion ResistanceCLASS 4
Mohs Hardness6
Dcof0.50
Water Absorption<0.5%
Frost ResistancePass
RectifiedYes
Body TypeColor Body Porcelain
Pieces Per Box15
lbs Per Box26.64
Boxes Per Skid56
lbs Per Skid1492
Country Of OriginTR