Anatolia La Marca Travertino Instrata Polished Bullnose Porcelain 3" x 12"
Anatolia La Marca Travertino Instrata Polished Bullnose Porcelain 3" x 12"
SKU: 4502-0287-0
Fast local pickup & delivery available
Quick turnaround from our supplier network
Fast local pickup & delivery available
Quick turnaround from our supplier network
Enter the Sq.Ft Required below
sqft
Delivery or Pickup
Choose how you'd like to proceed
For This Product Only
For Multiple Products
Product Information
| Product Name | Travertino Instrata |
| SKU | 4502-0287-0 |
| Brand | Anatolia Tile |
| Collection | La Marca |
| Product Line | Trims |
| Material | Porcelain |
| Tile Type | Trim |
| Finish | Polished |
| Size | 3 cm x 12 in / 7.1 x 30 cm |
| SQFT Per Piece | 0.25 |
| Shade Variation | V2 |
| Abrasion Resistance | CLASS 4 |
| Mohs Hardness | 5 |
| Dcof | 0.50 |
| Water Absorption | < 0.5% |
| Frost Resistance | Pass |
| Rectified | Yes |
| Body Type | Glazed Porcelain |
No documents available
Contact us for installation guides, warranty information, or technical specifications
Contact Support
Click to zoom in
About this product
Anatolia Tile La Marca Travertino Instrata is a 3" x 12" polished bullnose. The surface carries a polished face with a full reflective shine. Expect variation of V2, a slight shift in tone between pieces that stops the installation looking printed. As a bullnose, it finishes an exposed tile edge, capping a wainscot, a niche or the top of a shower surround without leaving a raw cut on show. The published figures are a DCOF of 0.50, at or above the 0.42 threshold ANSI sets for level interior floors expected to be walked on wet, Class 4 abrasion resistance and Mohs hardness 5. The edges are rectified, cut square after firing, so it sets with a joint of roughly 2 to 3 mm on a flat substrate. The body is glazed porcelain.
More from La Marca
View More →About this product
Anatolia Tile La Marca Travertino Instrata is a 3" x 12" polished bullnose. The surface carries a polished face with a full reflective shine. Expect variation of V2, a slight shift in tone between pieces that stops the installation looking printed. As a bullnose, it finishes an exposed tile edge, capping a wainscot, a niche or the top of a shower surround without leaving a raw cut on show. The published figures are a DCOF of 0.50, at or above the 0.42 threshold ANSI sets for level interior floors expected to be walked on wet, Class 4 abrasion resistance and Mohs hardness 5. The edges are rectified, cut square after firing, so it sets with a joint of roughly 2 to 3 mm on a flat substrate. The body is glazed porcelain.
Product Information
| Product Name | Travertino Instrata |
| SKU | 4502-0287-0 |
| Brand | Anatolia Tile |
| Collection | La Marca |
| Product Line | Trims |
| Material | Porcelain |
| Tile Type | Trim |
| Finish | Polished |
| Size | 3 cm x 12 in / 7.1 x 30 cm |
| SQFT Per Piece | 0.25 |
| Shade Variation | V2 |
| Abrasion Resistance | CLASS 4 |
| Mohs Hardness | 5 |
| Dcof | 0.50 |
| Water Absorption | < 0.5% |
| Frost Resistance | Pass |
| Rectified | Yes |
| Body Type | Glazed Porcelain |
No documents available
Contact us for installation guides, warranty information, or technical specifications
Contact Support















